| Product Lists | Information | Specification |
|---|---|---|
|
Merkur 30:1 Merkur Spray Package 30:1 Application : - Finishing - Protective Coating / Touch Up - Sprays medium to higher solids coatings - Ideal for such as steel fabrication, marine, rail, industrial and structural steel 
|
High Performance Fine Finish Packages Precise pressure and output in a variety of configurations delivers long lasting superior performance |
Maximum Fluid Working Pressure : 207 bar Minimum air inlet pressure : 0.7 bar Maximum air inlet pressure : 7 bar Flow Rate at 60 cpm : 4,5 l/m Fluid Inlet : 3/4 In. npt Fluid Outlet : 3/8 In. npt Air Inlet : 1/2 in. npt(f) Maximum ambient air temperatur : 49 °C Maximum fluid temperature : 71 °C |
|
Ultra Max II 1095 Application : - Exterior Residential - Heavy Commercial - Industrial 
|
Everiday Reliability SmartControl 3.0 with ProGuard Endurance Pump MaxPower Motors Easy-out Filter Heavy Duty Prime Valve |
Power Requirements : 220-240 VAC, 50/60 HZ, 10 A Generator Minimum W : 5000 Cycles per gallon (liter) : 123 (33) Maximum Delivery : 4.1 lpm Fluid Outlet : 1/4 in. npsm Maximum Tip Size : 1 Gun = 0.033 ; 2 Gun = 0.023 |
|
Ultra 395 Application : Lacquer, Stains, Interior Latex, Exterior Latex, Enamel, Acrylics 
|
The performance and versatility of the Ultra 395 PC has made it Graco's most popular sprayer. SmartControl 1.0 pressure control delivers a consistent spray fan without fluctuation and the proven reliability |
Maximum Fluid Working Pressure : 207 bar Maximum Delivery : 2.0 lpm Maximum Tip Size : 0.023 Fluid Outlet npsm : 1/4 in. Cycles : 700 / gallon Generator Minimum : 3.000 W Power : 220-240V, 7 A, 50/60 Hz |
|
Air Pro Gun, HVLP 1.1mm Application : - Liquid coatings for automotive - Metal & wood - Waterborne, high wear, adhesive and others - Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component materials, Sealants, Urethane, UV Coating 
|
Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications |
Maximum Working Fluid Pressure : 21 bar Maximum Working Air Pressure : 7 bar) HVLP Gravity/Siphon Feeds : 2.0 bar HVLP Pressure Feed : 2.8 bar Fluid and Air Operating Temperature Range : 109°F (0°C to 43°C) Weight : 22.3 oz. (632 g) Air Inlet : 1/4-18 npsm Fluid Inlet : 3/8 npsm Air Consumption Gravity/Siphon Feed @29 psi : 15.5 scfm Air Consumption Pressure Feed @29 psi : 21.0 scfm |
|
Air Pro Gun, conv, 1.4mm Air Pro Gun, Conv, Gravity Cup, 1.4 mm Air Pro Gun, Conv, Pressure Feed, 1.8 mm Air Pro Gun (GUN & Cup Assy) Application : - Liquid coatings for automotive - Metal & wood - Waterborne, high wear, adhesive and others - Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component materials, Sealants, Urethane, UV Coating
|
Advanced Spraying Technology for Automotive, Metal, Wood, Waterborne, High Wear and Adhesive Applications |
Maximum Working Fluid Pressure : 7 bar Maximum Working Air Pressure : 7 bar Fluid and Air Operating Temperature Range : 0°C to 60°C Air Inlet : 1/4-18 npsm (R1/4-19) compound thread Fluid Inlet : 3/8-18 npsm (R3/8-19) compound thread Weight : 485 g |
|
Pail Mount Airless Package, 23:1 Application : - Solventborne and waterborne fluids - High solids, plural component coatings - Resins - Stains, lacquers and varnishes - Cleaning fluids - Acid-catalyzed materials - High solid coatings 
|
Typical Fluids Handled : Solventborne and waterborne fluids High solids, plural component coatings Resins Stains, lacquers and varnishes Cleaning fluids Acid-catalyzed materials High solid coatings |
Maximum fluid working pressure : 160 bar Maximum air input pressure : 7 bar Ratio 23 :1 Maximum operating temperature : 120 °F (50 °C) HOSE, fluid; nylon; cst fluid fittings;1/4 npsm (fbe); 1/4 in. (6 mm) ID; 25 ft (7.6 m) long HOSE, whip, fluid; nylon; cst fittings; 1/4 npsm (fbe); 3/16 in. (5 mm) ID; 23.6 in. (0.6 m) long |
|
XTR airless Spray Gun Application : - Hard-to-spray Industrial - Protective Coatings 
|
Rugged Design to Handle the Toughest Protective Coatings, Built for Extreme Conditions : Compact design allows for easy maneuverability XTR-5: maximum fluid pressure of 345 bar XTR-7: maximum fluid pressure of 500 bar Variety of handle and trigger options High quality materials and constru |
Maximum Working Pressure : 500 bar Fluid Inlet : 1/4 in. npsm (m) Maximum Fluid Temperature : 71 °C Weight (including tip and tip guard) : 745 g |
|
G40, AA GUN, RAC Spray Gun Application : - Wood and metal finishing - Lacquer, Latex, Plural Component Materials, Polyurethane, Solventborne, Urethane, UV Coating, Varnish, Waterborne 
|
An enhanced spray tip for uniform atomization Unique aircap enables soft spray Increased transfer efficiency |
Maximum Working Fluid Pressure : 280 bar Maximum Working Air Pressure : 7 bar Maximum Working Fluid Temperature : 43 °C Fluid Inlet : 1/4-18 npsm Air Inlet : 1/4-18 npsm (R1/4-19) compound male thread Gun Weight : 450 grams |
|
TEXSPRAY (APX 8200) Application : - Plaster wall smoothing and finishing - Plaster, Joint filler, Finish 
|
Dedicated for plaster wall smoothing and finishing, the TexSpray APX 6200 plaster sprayer is built for the true professional. This sprayer pumps the heaviest materials with optimal output and without pressure fluctuations. |
Maximum fluid working pressure : 207 bar Maximum Delivery : 8 lpm Maximum Tip size : 0.114 cm Fluid Outlet npsm : 1.27 cm 19 Cycles per liter Generator minimum : 5000 Watt Environmental temperature range : 4° - 49°C Minimum fluid temperature : 4°C |
|
Sprayer T-Max 405 ( Water Base) Application : - Water-based Materials only - High-volume interior texture finishes and exterior aggregates such as EIFS adhesive base coat and topcoats, synthetic stucco, acoustics, cork, mortar, deck coatings, anti-skid coatings & more 
|
Filling unit Graco T-Max 405 is designed to spray different types of fillers and plasters upon the surface. | Maximum air working pressure : 17 bar Maximum working pressure : 40 bar Generator required : 7 kW Hopper capacity : Maximum 12 gallons (45 liters) Operating 10 gallons (38 liters) Maximum delivery with texture material : 3.8 to 5.7 lpm Fluid outlet size : 1 in. (f) cam and groove Weight : Without hoses or applicator : 51 kg With hoses and applicator : 57 kg |
|
System AGP 100 CC Boom Application : - Two-component sealants and adhesives - Curtainwall and glass installation 
|
Ideal for curtainwall and glass installation applications, the Graco ExactaBlend Advanced Glazing Proportioner (AGP) provides on-ratio dispensing of two-component sealants and adhesives. |
Maximum Working Pressure : 207 bar Minimum flow rate 6:1 to 14:1 ratio (by weight) : 500 g/min Minimum flow rate 1:1 ratio (by weight) = 1 kg/min Maximum flow rate 1:1 to 14:1 ratio (by weight) = 4000 g/min Incoming air pressure required : 6 - 7 bar Maximum operating temperature : 50 °C Voltage range : 90-264 VAC 50/60 Hz 1 phase, 4 A Fluid outlet base : 1/2 npt (f) Fluid outlet catalyst : 1/4 npt (f) Air inlet size : 3/4 npt (f) Weight : 392 kg |
|
Sprayer Truecoat Pro-x 240 Application : - Residential, apartments, townhomes and small commercial buildings ( Spraying up to 500 gallons (1893 liters)per year ) - Furniture & Healthcare/disinfectant 
|
Graco has the Right Solutions for all your Handheld Spraying Applications. |
For portable spray applications of water-based architectural paints and coatings only
Not for use in explosive atmospheres Maximum working pressure : 137.8 bar Weight : 2.87 kg Storage temperature range : 0° to 50°C Storage Humidity Range : 0% to 95% relative humidity, non-condensing Voltage : 18 VDC, Lithium Ion Operating temperature range : 4° to 32°C |
|
Pro XS 4 Gun, AA Application : - Auto assembly/Feeder, Aerospace, bus, Farm & construction - General metal - Enamels, epoxies, urethane, high solid, plural component, waterborne 
|
PRO Xs combines the benefits of material savings with all the outstanding finish quality and durability you've come to expect from Graco. | Voltage : 85 kV Maximum current : 125 microamperes Maximum Working Fluid Pressure : 7 bar Maximum Working Air Pressure : 7 bar Minimum Air Pressure at Gun Inlet : 2.8 bar Maximum fluid operating temperature : 48°C Air inlet fitting : 1/4 npsm(m) Fluid inlet fitting : 1/4-18 npsm(m) |
|
Pro XS3 Gun, Smart, SC, 60KV Application : - Auto assembly/Feeder, Aerospace, bus, Farm & construction - General metal - Enamels, epoxies, urethane, high solid, plural component, waterborne 
|
PRO Xs combines the benefits of material savings with all the outstanding finish quality and durability you've come to expect from Graco. |
Voltage : 30-60 kV Maximum current : 125 microamperes Maximum Working Fluid Pressure : 7 bar Maximum Working Air Pressure : 7 bar Minimum Air Pressure at Gun Inlet : 2.8 bar Maximum fluid operating temperature : 48°C Air inlet fitting : 1/4 npsm(m) Fluid inlet fitting : 3/8 npsm(m) Paint Resistivity Range : 3 megohm/cm to infinity |
|
Turbine CX Spray System Application : - Fine finish - Small jobs 
|
GRACO HVLP Compressor Turbine Paint Sprayer. |
Maximum Working Pressure : 0.41 bar Power Requirements : 230 Vac, 50/60 Hz 1 phase, 6.5A min. Power Cord : No. 16 AWG, 3 wire, 10 ft (3 m) CFM unrestricte : 115 cfm Turbine Stages : 3 Maximum Turbine Hose Length : 18 m Cup capacity : 1 liter Turbine Shipping Weigh : 21 kg |
